# Software

## Step by Step setup

You don't have to program the compute module yourself, but you have to set it up. The following steps help you to setup your Tracker.

{% hint style="success" %}
If you want to have a deeper insight in the code itself, you can find the documented code in the github repository: <https://github.com/oliverheisel/DataDrivenSailing>
{% endhint %}

Use the hostname: <mark style="color:blue;">**buoy1.local**</mark> (replace the number accordingly)

The instructions are the same as the one of the BoatTracker. You can find the [BoatTracker instructions here.](https://datadrivensailing.gitbook.io/wiki/boattracker/setup-instructions/software) There is one configuration step that is different:

### G\_Change the configuration

1. Open the code configuration file (it is a python script, so use your ide): <mark style="color:blue;">`/home/globaladmin/code/config/config.py`</mark>
2. Change the hostname number accordingly (it needs to be the same as you defined in the firmware - see Task 1)
3. <mark style="background-color:yellow;">**!!! This is what changed !!!**</mark> - Make sure that Type = "<mark style="color:blue;">buoy</mark>" and the others are commented out
4. Save and Reboot with: <mark style="color:red;">`sudo reboot`</mark>
